高压电磁阀安装

高压电磁阀安装应注意以下几点要求：
1、安装前应参阅产品手册,是否符合你的要求。

2、管使用前应该洗干净,脏的介质应安装过滤器,防止杂质干扰的正常工作电磁阀.

3、中止后很长一段时间高压电阀洗,应该清除coagulationbefore使用;当根据部分的顺序,为了归还容易安装。

4、电磁阀通常是单向工作,无法逆转,阀门管道流体运动方向的箭头,是一致的。

5、电磁阀代替冰应该加热,或一组绝缘措施。

6、一般身体水平,线圈垂直,一些产品可以是任何安装,但当条件允许,最好的是垂直的,为了增加使用寿命。

7,电磁阀线圈的导线连接后,你应该确认是否坚决,加入电子元件不应该抖动,宽松会造成电磁阀不工作。连续生产的电磁阀最好使用旁路,易于维护,不影响生产。

 1, Before installation should refer to the product manuals, whether to accord with your requirement.

 2, The pipe should be washed clean before using, dirty medium should install filters to prevent impurities interfere with the normal work of the solenoid valve.

 3, A long time after discontinuation of high pressure solenoid valve, should be cleared coagulationbefore using; When washing according to the order of the parts, in order to installed restitution easy.

 4, solenoid valve is generally one-way work, cannot reversed, the valve arrow is the direction of pipeline fluid movement, to be consistent.

 5, Solenoid valve in place of icy should be heated, or set the insulation measures.

 6, General body level, the coil vertical, some products can be any installation, but when the conditions permit, the best is vertical,in order to increase service life.

 7, After lead wire of solenoid valve coil connected, you should confirm whether firmly,join of electrical components should not jitter, loose will cause the solenoid valve does not work. Continuous production of solenoid valves had better use bypass, easy maintenance, do not affect production.